Installing our roller blinds is easy peasy. There are only three steps: screw in the brackets, attach the roller blinds, add the chain clip. That’s it! Anyone can do it. All you need is a screwdriver – and our squarehead screws work with both a crosshead, and a squarehead, screwdriver. And yes, you can use an electric screwdriver too!
Hold the brackets in place and put two screws in each bracket. We’ve supplied you with 2x high-quality (colour-matched) screws for each bracket. You can use a manual or electric screwdriver, and there’s no need to pre-drill a pilot hole.
Now your brackets are in place, all you need to do is slot in your blinds. You’ll notice that both ends of the tube are slightly different. One is has a “female” connector, the other is springy “male” connector; you need to insert the blinds’ “female” side first (into the brackets’ male connector) and the repeat for the blind’s springy “male” connector into the bracket’s “female” connector.
The final step is installing the supplied clip to keep your chain tidy and safe for children. We recommend installing this with a bit of slack to allow for a smooth operation.
That’s it; it’s as easy as that.
